| Max. turning Dia.×L |
ø 350mm(13.78in.) x 200mm(7.87in.)L |
| Spindle Nose |
ASA A²-8 |
| Spindle speed range |
A:25 to 2,500r.p.m. |
| B:32 to 3,200r.p.m |
| X-axis travel |
300mm (11.81in.) |
| Z-axis travel |
450mm (17.72in.) |
| Rapid traverse (X/Z) |
20,000/20,000mm/min. (65.62/65.62ft/min.) |
| Main motor |
AC 22/18.5kW (30min./Cont.) x 2 |
| Mass of machin |
12,000kg (26,448 lbs) |
| Power Supply |
86kVA |
- Hydraulic chuck (12") x 4
- Coolant equipment
- Coolant oil level detector
- Chip conveyor
- Splash guard
- Foot switch
- Door interlock
- Alarm message function
- Hyd circuit alarm indicator
- Lubrication circuit alarm indicator
- Production counter
- Tool counter
- Maintenance counter
- Service tools with box
- Standard tool holders
- Chucking inside-outside switchable.
|
- Air-blow for chuck
- High pressure coolant equipment
- Auto loading device
- Loading spindle orientation
- Spindle speed 2 steps auto change
- Loading spindle inching device
- Chuck pressure high-low change
- Carrier index by servo drive
|
|
| Interpolation |
Linear, circular |
| Controlled Axes |
2 axes(X/Z) × 2 |
| Simultaneous controlled axes |
2 axes × 2 |
| Least input increment |
0.001mm / 0.001mm (0.0001 in.) |
| Least command increment |
X:0.0005mm/p, Z:0.001mm/p
(X:0.00002in./p, Z:0.00004in./p) |
| Max. program dimension |
± 99999.999mm (±3937.0078in.) |
| Feed command/rev. |
0.0001 to 500.0000mm/rev.
(0.000001 to 9.999999in./rev.) |
| Thread read command /F4 |
0.0001 to 500.0000mm/rev.
(0.000001 to 9.999999in./rev.) |
| Least manual feed |
0.01 to 0.001mm (0.0001in.) |
| Tool offset value |
± 999.999mm (16set) (±99.9999in.) |
| Backlash compensation |
X:0.0005 to 0.1275mm Z:0.001 to 0.255mm |
| Other standard functions |
- Machine lock
- Block delete
- Error detect
- Constant surface speed control
- Incremental tool offset
- Decimal point programming
- Incremental feed
- Reference point return
- Chamfering/corner rounding
- Tool wear and Geometry offset
- PMC Diagram display
- Canned cycles G90/92/94
- CRT Character display
- Memory and edit 20m x 2
- Sequence number search
- Program number search
- Spindle offset
- Single block
- Dry run
- Chamfering
- Tape punch interface (RS232C)
|
- Additional memory 40/80/160/320/640/1,280m
- Nose radius compensation
- Tool life management
- Multiple repetitive cycles G70 to G76
- Stored stroke limit
- Run hour display *Please refer to FANUC brochure
*Specifications are subject to change without prior notice and without
any obligation on the part of the manufacturer.
|
|
Variation
Specification