| Max. turning Dia.×L |
ø 200mm(7.87in.) × 200mm(7.87in.)L |
| Spindle Nose |
ASA A²-6 |
| Spindle speed range |
A:30 to 3,000 r.p.m
|
|
B:40 to 4,000 r.p.m |
| X-axis travel |
170mm (6.69in.) |
| Z-axis travel |
350mm (13.78in.) |
| Rapid traverse (X/Z) |
20,000/24,000mm/min. (26.25/39.37ft/min.) |
| Main motor |
AC 15/11kW (30min./cont.) × 2 |
| Turret |
6st. drum × 2 |
| Net weight |
8,000kg (17,600 lbs) |
| Power capacity |
60KVA |
- Hydraulic chuck (8") × 4
- Coolant equipment
- Maintenance counter
- Chip conveyor
- Splash guard
- Foot switch
- Door interlock
- Alarm messages function
- Hydr. circuit alarm indicator
- Lubrication circuit alarm indicator
- Production counter
- Service tools with box
- 6 station drum turret × 2
- 1 set stadard tool holders
- Tool counter
|
- Air-blow for chuck
- High pressure coolant equipment
- Auto loading device
- Spindle orientation
- Chuck pressure high-low change
- Spindle inching device
- Chucking insede-outside change
|
|
|
| Interpolation |
Linear, circular |
| Controlled Axes |
2 axes(X/Z) × 2 |
| Simultaneous controlled axes |
2 axes × 2 |
| Least input increment |
0.001 / 0.001mm (0.0001 in.) |
| Least command increment |
X:0.0005mm, Z:0.001mm
(X:0.00002in, Z:0.00004in.) |
| Max. program dimension |
± 99999.999mm (±3937.0078in.) |
| Feed command/rev. |
0.0001 to 500.0000mm/rev.
(0.000001 to 9.999999in./rev.) |
| Thread read command /F4 |
0.0001 to 500.0000mm / rev.(0.00001 to 9.99999in./rev.) |
| Least manual feed |
0.01 to 0.001mm (0.0001in.) |
| Tool offset value |
± 999.99mm(16set) (±99.9999in.) |
| Backlash compensation |
X:0.01 to :9.999mm/DIA. Z;0.001 to 9.999mm
|
| Other standard functions |
- Machine lock
- Block delete
- Error detect
- Constant surface speed control
- Incremental tool offset
- Decimal point programming
- Incremental feed
- Reference point return
- Chamfering/corner rounding
- Tool wear and Geometry offset
- PMC Diagram display
- Canned cycles G90/92/94
- CRT Character display
- Memory and edit 20m × 2
- Sequence number search
- Program number search
- Spindle offset
- Single block
- Dry run
- Chamfering
- Tape punch inter face (RS232C)
|
- Additional memory 40/80/160/320/640/1,280m
- Nose radius compensation
- Tool life management
- Multiple repetitive cycles G70 to G76
- Stored stroke limit
- Run hour display *Please refer to FANUC brochure
*Specifications are subject to change without prior notice and without
any obligation on the part of the manufacturer.
|
|
Variation
Specification