MT4-125
Variation Top Specification Separate Drive For Each Spindle Tooling System Tooling stroke Floor spacce

※Please refer to our MT4-200, too.

Model

MT4-125

MT4-200
Max turning Dia, x L. ø 125mm(4.92in.) x 110mm(4.33in.)L ø 200mm(7.8in.) x 100mm(4in.)L
Spindle nose ASA A²-5 ASA A²-6
Spindle speed range A:35 to 3550 r.p.m.
B:50 to 5000 r.p.m (std.)
 A:26 to 2670 min-¹
B:30 to 3000 min-¹
C:Maximum 4000 min-¹
Spindle carrier index (speed) 90 degrees per 2.0 sec.
180ﾟ degrees per 2.5 sec.		 90 degrees per 2.0 sec.
180 degrees per 2.5 sec.
X-axis stroke 170mm (6.69in.) 160mm (6.30in.)
Z-axis stroke 250mm (9.84in.) 250mm (9.84in.)
Rapid speed (X/Z) 18,000/24,000mm/min. (59.06/78.74ft/min.) 20,000/24,000mm/min. (65.62/78.74ft/min.)
Main moter AC 7.5/5.5kW (30min./cont.) x 2 AC 15/11kW (30min/cont.) x 2
Turret 8st. drum x 2 8st. drum x 2
Machine weight 5,000kg (11,023 lbs) 7,500kg (16,500 lbs)
Power source 40kVA 60kVA
  • 6inch Hyd. chuck x 4
  • Splash guard
  • Coolant system
  • Chuck airblow equipment
  • Chip-conveyor with coolant tank (tank cap. 200 L)
  • Lub. pressure and level check system
  • Hyd. pressure check system
  • Alarm messages (CRT)
  • Messages for operator (CRT)
  • Maintenance counter (PMC)
  • Tool counter (PMC)
  • Production counter
  • User parameters (PMC)
  • Set-up, maintenance tools
  • Spindle orientation (loading position,)
  • High pressure coolant system
  • Chuck pressure Hi-Lo change system
  • Loading/unloading equipment
  • Measuring equipment (post-process type)
  • Additional memory 40/80/160/320/640/1,280m
  • Nose radius compensation
  • Tool life management
  • Multiple repetitive cycles G70 to G76
  • Stored stroke limit
  • Run hour display *Please refer to FANUC brochure
*Specifications are subject to change without prior notice and without any obligation on the part of the manufacturer.

Interpolation Linear, circular
Controlled Axes 2 axes(X/Z) x 2
Simultaneous controllel axes 2 axes x 2
Least input increment (X/Z) 0.01 / 0.001mm (0.0001 in.)
Least command increment X:0.0005mm/p, Z:0.001mm/p
(X:0.00002in./p, Z:0.00004in./p)
Max. program dimension ± 99999.999mm (±3937.0078in.)
Feed command/rev. 0.01 to 500.00mm/rev.
(0.0001 to 50.000in./rev.)
Thread read command /F4 0.01 to 500.00mm/rev. (0.0001 to 50.000in./rev.)
Least manual feed 0.01 to 0.001mm (0.0001in.)
Tool offset value ± 999.999mm(16set) (±99.9999in.)
Back lash compensation X:0.0005 to 0.1275mm Z:0.001 to 0.255mm
Other standard functions
  • Machine lock
  • Block delete
  • Error detect
  • Constant surface speed control
  • Incremental tool offset
  • Decimal point programming
  • Incremental feed
  • Reference point return
  • Chamfering/corner rounding
  • Tool wear and geometry offset
  • PMC diagram display
  • Canned cycles G90/92/94
  • CRT character display
  • Memory and edit 20m x 2
  • Sequence number search
  • Program number search
  • Spindle offset
  • Single block
  • Dry run
  • Chamfering
  • Tape punch inter face (RS232C)

HOME |  Profile of company |  MAP |  MAIL |  cnclathe |  cnc carving machine |  water jet